VOLUME CONTROLS for Pachislo Slot Machine /TWO SPEAKERS / DIY KIT

Description

NEW Universal Slot Machine Volume Controls for two speakers. Works on all pachislos and comes with enough wires to complete the job right. It can be mounted inside or outside the machine box. The volume control housing is about  3-1/2" x 1-1/2" Small enough to mount inside the machine box easily and will
mount
on most doors
easily
. This is a "DIY". See the content list below. Can be mounted with the supplied screws or 3M double sided foam tape. Very simple to install and comes with easy to follow instructions. Mounting wings are slotted to make it easy to level the box, only 2 screws necessary to secure the box.
VERY PROFESSIONAL LOOKING DELUXE KIT.
Wires are soldered onto the terminals then heat shrink tubing on the soldered terminals.
MAKE THE INSIDE OF YOUR MACHINE LOOK AS GOOD AS THE OUTSIDE.
Comes with the following:
2- Volume Controls with Custom Made Housing.
9" of wire from each terminal
2- Black mounting screws.
2- Knobs
3M Double stick foam mounting tape pre-cut.
4 Twist Wire connector nuts
Instruction Sheet with pictures.
For any problems or questions contact me through the ebay message center for a faster response.